SL3000 Amplifier - Rack mounted
The SL3000 Amplifier is a three-way, active control and amplification system specifically designed for the KV2 Audio SL Series modular loudspeaker systems. The SL3000 Stereo Amplifier drives and controls one SL412 per channel and follows the typical KV2 holistic approach of matching components with high quality electronics for true direct performance. The SL3000 utilises a 1000-watt high efficiency – current enhancing, switch – mode technology, with linear active filter design for the low mid-section, a 200-watt class AB push pull low intermodulation design amplifier for the mid-range and a similar 100-watt design for the high frequencies. It houses all time alignment, phase correction, amplification and equalisation as well as providing an external subwoofer crossover output to run further subwoofer cabinets if needed.
Output Channels
Number of Channels |
2 (stereo) |
Total Output Power |
2x 1300W |
High Frequency Amplifier Specification
Type |
Class AB - Push Pull - Low IM Design, Transformer balanced output |
Rated Continuous Power |
100W |
Distortion |
<0.02% |
Operating Bandwidth |
2,5kHz to 40kHz |
Mid Frequency Amplifier Specification
Type |
Class AB - Push Pull - Low IM Design, Transformer balanced output |
Rated Continuous Power |
200W |
Distortion |
<0.02% |
Operating Bandwidth |
400Hz to 2,5kHz |
Low Frequency Amplifier Specification
Type |
High efficiency, Current-enhancing switch mode |
Rated Continuous Power |
1000W |
Distortion |
<0.02% |
Operating Bandwidth |
35Hz to 400Hz |
Signal Input
Input Sensitivity |
1V RMS |
Input Impedance |
20kΩ (balanced) |
Speaker Output
Power Requirements
Power Connector |
2x Neutrik PowerCon® |
Operating Voltage |
115V / 230V / 250V |
Operating Voltage Range |
100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz |
Recommended Amperage |
2x10A 115V | 2x5A 230V | 2x5A 250V |
Physical Dimensions
Height |
177.8 mm (7.0"), 4RU |
Width |
481.4 mm (18.95") |
Depth |
495 mm (19.5") |
Weight |
39.2 kg (86.62lbs |