Description
MARTIN LIGHTING MACAURA DETAILS
The Martin Lighting MAC Aura is an award-winning wash light that lighting designers have turned to the world over due to its versatility as a powerful beam and wash luminaire of the highest caliber. The result of out-of-the-box creative thinking, it is the first LED moving head wash light to combine multicolor beam LEDs with a backlight LED array that takes the synthetic look out of LED wash lights.
Features:
- Single-lens wash with fully premixed color
- Broad color palette, RGBW color mixing
- Eye-candy Aura Effects™
- Uniform shades
- Built-in FX engine
- 11 to 58° zoom
- 3850 Lumens output
- Rapid movement
- Compact, low weight design (5.6 kg)
- High efficiency, low power consumption, long lifetime
Specifications:
- Physical:
- Length: 302 mm (11.9 in.) across yoke
- Width: 302 mm (11.9 in.) across yoke
- Height: 360 mm (14.2 in.), head straight up
- Weight: 5.6 kg (12.4 lbs.) without accessories
- Dynamic Effects:
- Beam color mixing: RGBW
- Aura (secondary lens array illumination) color mixing: RGB
- Beam color temperature control: CTO, variable 10 000 - 2500 K
- Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
- Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
- Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
- Electronic dimming: Independent beam and aura, four dimming curve options
- Pan: 540°
- Tilt: 232°
- Pan and tilt speed: Adjustable via onboard control panel and DMX
- Control and Programming:
- Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
- Macro programs selectable via DMX: Synchronized beam and aura effects
- Control: DMX
- RDM: Implemented
- Control resolution: 8-bit, with 16-bit control of pan & tilt
- DMX channels: 14/25
- Setting and addressing: Control panel with backlit graphic display
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Transceiver: RS-485
- Fixture software update: Via DMX with Martin™ USB Duo DMX
- Interface Box
- Optics:
- Zoom range: 11° - 58°
- One-tenth peak angle
- Light source: 19x 10W RGBW LED Array System
- LED refresh rate: Beam 1220 Hz, Aura 4395 Hz
- Minimum LED lifetime: 50 000 hours (to >70% luminous output) - Figure obtained under manufacturer´s test conditions
- Photometric Data:
- Total output: 3850 lumens (zoom at maximum)
- Construction:
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Protection rating: IP20
- Installation:
- Mounting points: One M12 threaded hole for rigging clamp
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to combustible materials: 100 mm (4.0 in.)
- Minimum distance to illuminated surfaces: 200 mm (7.9 in.)
- Connections:
- AC power input: Neutrik PowerCon
- AC power throughput: Neutrik PowerCon
- DMX and RDM data in/out: 5-pin locking XLR
- Electrical:
- AC power: 100-240 V nominal, 50/60 Hz
- Maximum total power consumption: 260 W
- Power supply unit: Auto-ranging electronic switch mode
- Main fuse: 5 AT (slow blow)
- Typical power consumption, all effects static, zero light output: <15 W
- Typical Power and Current:
- 100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
- 120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
- 208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
- 230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
- 240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
- Thermal:
- Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.
- Approvals:
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
- EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA E598-2-17 (CSA E60598-1)
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-TICK N4241
- Included Items:
- M12 bolt suitable for use with Martin rigging clamps
- User manual
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.