Description
General Features
- Very high power and channel density The four-channel FP 10000Q delivers a total of 10000 W (4 x 2500 W @ 2 ohms) in only 2U
- Four-channel flexibility Four channels in one cabinet increases efficiency, flexibility and value in powering monitor systems, line arrays, and bi- or tri-amped systems. Adjacent channels bridgeable for 2- or 3-channel operation
- Lab.gruppen sound quality FP 10000Q amplifiers maintain the impeccable sonic performance standards set by the original fP Series, with the same durability and even greater efficiency
- NomadLink network ready Monitoring and control of key functions accessible via the intuitive DeviceControl software and the robust, daisy-chained NomadLink network
- Patented Class TD amplifier topology Road-proven output stage delivers Class B audio quality with Class D efficiency
- Regulated Switch Mode Power Supply (R.SMPS) Output power remains constant even with significant drops in the mains voltage
- Efficient cooling system Unique, lightweight Intercooler copper cooling system dissipates more heat to allow extended peak output
- Adjustable parameters Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any system or application
- XLR input connectors
- Heavy-duty binding post or Speakon output connectors
- Comprehensive protection and warning Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start
- 1-year Manufacturer's warranty
General Specifications
- Number of channels 4
- Peak total output all channels driven 10000 W
- Peak output voltage per channel 150 V
- Max. output current per channel 38 Arms
- Max Power Output:
- 16 ohms: 660 watts x 4 chan.
- 8 ohms: 1600 watts x 4 chan.
- 4 ohms: 2100 watts x 4 chan.
- 2 ohms: 2500 watts x 4 chan.
- Bridged, 16 ohms: 2600 watts x 2 chan.
- Bridged, 8 ohms: 4200 watts x 2 chan.
- Bridged, 4 ohms: 5000 watts x 2 chan.
- Performance with Gain: 35 dB and VPL: 150V
- THD 20 Hz - 20 kHz for 1 W <0.1%
- THD at 1 kHz and 1 dB below clipping <0.05%
- Signal To Noise Ratio >112 dBA
- Channel separation (Crosstalk) at 1 kHz >70 dB
- Frequency response (1 W into 8 ohms) +0/-3 dB 6.8 Hz - 34 kHz
- Input impedance 20 kOhm
- Input Common Mode Rejection, CMR 45 dB
- Output impedance @ 100 Hz 56 mOhm
- Output slew rate into 8 ohms 20 V/microsecond
- Voltage Peak Limiter (VPL), Max. Peak Output
- VPL, selectable per ch. 150, 121, 101, 83, 70, 56, 47, 38 V
- VPL, selectable when bridged 1) 300, 242, 202, 166, 140, 112, 94, 76 V
- Voltage Peak Limiter mode (per ch.) Hard / Soft
- Gain and Level
- Amplifier gain selectable (all channels) 1) rear-panel switches: 23, 26, 29, 32, 35, 38, 41, 44 dB
- Default gain 35 dB
- Level adjustment (per ch.) Front-panel potentiometer, 21 position detented from -inf to 0 dB
- Connectors and Switches
- Input connectors (per ch.): 3-pin XLR, electronically balanced
- Output connectors (per ch.): Neutrik Speakon or Binding Posts (must be specified upon order)
- Output bridge mode: A+B, C+D - Ch.s A and C are signal input source
- NomadLink network: On board, 2 x RJ45 EtherCon connectors, IN and OUT
- Intelligent fans (on/off): Yes, depending on presence of output signal
- Power on/off and Remote enable on/off: Individual switches on front-panel
- Cooling: Two fans, front-to-rear airflow, temperature controlled speed
- Front-panel indicators:
- Common NomadLink Network; Power Average Limiter (PAL) 2); Power on
- Per channel: Signal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
- Power
- Operating voltage, 230 V / 115 V nominal 4) 130-265 V / 65-135 V
- Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
- Power Average Limiter (PAL) 2) Yes
- Soft start / Inrush Current Draw Yes / max. 5 A
- Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
- Dimensions (W/H/D)
- W: 483 mm (19), H: 88 mm (2 U), Overall D: 396 mm (15.6), Mounting D: 358 mm (14.1)
- Weight 12 kg (26.4 lbs.)
- Finish Black painted steel chassis with black painted steel / aluminum front
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.