Description
Overview
TheĀ K10Ā is nothing short of power with 12,000 W from a single rack space chassis. Capable of driving subwoofers and large-scale FOH systems equally well, numerous touring sound reinforcement systems are built around racks exclusively utilizing K10ā²s for all frequency bands, benefitting greatly from maximum flexibility. Operation with 2Ī© loads is not only safely possible but recommended, reducing the number of amplifiers required in a system.
In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size.
Fully digitally controlled and with a serial PC communication port as standard, the K10 is also available with KDSP board and KAESOP Ethernet/AES3 interface: theĀ K10 DSP+AESOPĀ amounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft'sĀ ArmonĆaPlusĀ (Interface available forĀ MediaMatrix,Ā Crestron,Ā AMX,Ā Q-SYSĀ control, and monitoring systems).
Power supply
- Advanced switch-mode worldwide operating power supply technology for high performance and compact size
- Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Protections
Fully protected circuit design with:- Ac protection: shut down power supply when AC mains voltage is outside the operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals reducing maximum output
- Thermal protection: output stages operating temperature up to 80 Ā°C (176 Ā°F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
General
- Fixed frequency switchmode output stage for high-grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Lightweight - for easier racking and shipping: 12 kg (26.5 lbs) according to the configuration
- Combo XLR/6.3mm jack Neutrik input connectors with link capability
- AES3 digital input
Settings
- LCD matrix interactive display
- Comprehensive-user friendly front panel display menu
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User-selectable gain/sensitivity
- User-selectable maximum output power for each channel
- User-selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built-in remote control via the RS-485 interface provides full diagnostic, operational setting, and system monitoring
Monitoring
- Hardware monitor available for fast local diagnostic
- Load impedance measurement/display for each channel
- Output power measurements/display for each channel
- Mains voltage and current measurements/display
- Downloadable log file of functional fault events with time-related trace
- Smart Card settings, parameters and upgrades functionality
Digital Signal Processing
- Analog Devices SHARCĀ® DSP architecture
- AD/DA converter: dual 24bit @ 96 kHz TandemĀ® architecture, 127 dB dynamic range, per channel
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 1 s for time alignment
- Active DampingControlā¢ for cable compensation
- Power limiter (TruePowerā¢, RMS voltage, RMS current) + Peak Limiter
Remote management
- Control and monitoring through ArmonĆaPlus
- Interface available for MediaMatrix, Crestron, AMXcontrol, Q-SYS and monitoring systems
| GENERAL | |||
| Output power per channel | |||
| Output power per channel | 6000 W @ 2 Ī© | 4000 W @ 4 Ī© | 2000 W @ 8 Ī© |
| Bridge mode | 12000 W @ 4 Ī© | 8000 W @ 8 Ī© | |
| Max output voltage / current | |||
| Single channel mode | 200 Vpeak / 125 Apeak | ||
| Bridge mode | 400 Vpeak | ||
| AC MAIN POWER | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V Ā±10%, 50-60 Hz | ||
| Operating voltage | 90 V ā 264 V | ||
| Power consumption / current draw | |||
| Idle | 115 V: 91 W ā 1.3 A | 230 V: 88 W ā 1.17 A | |
| 1/8 of max output power @ 4 Ī© | 115 V: 1250 W ā 12.2 A | 230 V: 1250 W ā 6.1 A | |
| 1/4 of max output power @ 4 Ī© | 115 V: 2500 W ā 22.6 A | 230 V: 2500 W ā 11.3 A | |
| THERMAL | |||
| Operating temperature range | 0Ā° ā 45Ā° C ā 32Ā° ā 113Ā° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 546 BTU/h ā 13.7 kcal/h | 230 V: 546 BTU/h ā 13.7 kcal/h | |
| 1/8 of max output power @ 4 Ī© | 115 V: 1244 BTU/h ā 313.5 kcal/h | 230 V: 1244 BTU/h ā 313.5 kcal/h | |
| 1/4 of max output power @ 4 Ī© | 115 V: 1943 BTU/h ā 489.6 kcal/h | 230 V: 1943 BTU/h ā 489.6 kcal/h | |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.